Glues all types of wallpaper effortlessly 

Powerful, high-quality adhesive
Great initial adhesive strength 
High yield

User-friendly
Extended open time makes it easy to correct mistakes 
Dries transparent
Ready to use
Very easy to apply evenly
Does not splash
Odourless
Very high viscosity
Wallcoverings glued with Clearpro can be removed effortlessly later with Easypro

Environmentally friendly
Non-flammable 
Non-toxic (contains no mercury or lead)
Solvent-free

pH-neutral (7)
Does not irritate the skin or respiratory system

Coverage 
1 kg = ± 6 m²

Packaging 
2 kg
5 kg
15 kg

- The surface must be dry, clean, solid, smooth, and slightly absorbent.
- Remove old wallpaper and remainders of adhesive. Rub off old coats of paint.
- Fill any holes and cracks.
- Prime highly absorbent surfaces, but make sure the surface is not completely sealed.
- Apply the adhesive evenly to the wall with a microfibre roller.
- Lay the back of the wallpaper in the adhesive and press it on with a rubber roller or plastic spatula.
- Immediately, and carefully, remove any adhesive from the front side of the wallcovering, using a microfibre cloth and clean, cold water.
- Drying time varies depending on the temperature, ventilation and humidity of the room.
- Do not use when the room temperature is below +10°C.
- Close container after each use and clean all tools with warm water immediately after use.