You are surfing from United States of America. Not correct? Change your country

Clearpro Adhesive


Professional ready-to-use water-based adhesive

Professional, ready-to-use adhesive for all wallcoverings on paper, non-woven and fabric backing. Great adhesive strength and ease of use are just two of the benefits of this high-quality wallpaper adhesive.

  • Glues all types of wallpaper effortlessly 

    Powerful, high-quality adhesive
    Great initial adhesive strength 
    High yield

    Extended open time makes it easy to correct mistakes 
    Dries transparent
    Ready to use
    Very easy to apply evenly
    Does not splash
    Very high viscosity
    Wallcoverings glued with Clearpro can be removed effortlessly later with Easypro

    Environmentally friendly
    Non-toxic (contains no mercury or lead)

    pH-neutral (7)
    Does not irritate the skin or respiratory system

    1 kg = ± 6 m2

    2 kg
    5 kg
    15 kg

  • - The surface must be dry, clean, solid, smooth, and slightly absorbent.
    - Remove old wallpaper and remainders of adhesive. Rub off old coats of paint.
    - Fill any holes and cracks.
    - Prime highly absorbent surfaces, but make sure the surface is not completely sealed.
    - Apply the adhesive evenly to the wall with a microfibre roller.
    - Lay the back of the wallpaper in the adhesive and press it on with a rubber roller or plastic spatula.
    - Immediately, and carefully, remove any adhesive from the front side of the wallcovering, using a microfibre cloth and clean, cold water.
    - Drying time varies depending on the temperature, ventilation and humidity of the room.
    - Do not use when the room temperature is below +10°C.
    - Close container after each use and clean all tools with warm water immediately after use.